Calgary Zombie Walk - October 2012

WOW I forgot to post this! This is from the Calgary Zombie Walk... Dejathoris and I didn't take very many pictures so we were waiting for more to show up on the internets before posting... And then I must have forgotten. This could happen sometimes. As always, you can see all our pics on our Flickr! Dejathoris went a Zombie Housewife. Her costume had a lot more details than I can remember so I'm going to ask her to write her own piece.

Our View from the middle of the pack

So... I don't know if you know this about me, but I'm kinda a wuss... I can't watch scary shows or movies unless someone is around so that they can tell me when I can look back at the TV. Suffice to say, I decided that I wanted to participate in the Calgary Zombie Walk this year to see what it was all about!  I did this knowing I would probably run in the opposite direction if I came across someone doing zipperface...(Edit: Dejathoris would distract me by pointing in the other direction)

My excuse was that originally for work this year, we were being challenged to Zombify a non-zombie movie or character. I figured if I was going to make a zombie costume, I would want two uses out of it at least and it's most likely not going to be a con or hallway costume. Dejathoris and I happened to find out about a super sekrit Costume sale happening at the Epcor Centre earlier in the month so we decided to head on downtown to see if we could find any inspiration pieces. Whilst wandering I came across a BRIGHT SHINY GREEN DRESS that actually fit and was long enough that made me think of Tinkerbell.

Adorable Zombie Children

AND THEN I WOULD GET TO WEAR WINGS! As Dejathoris knows, and now you do to, I have a secret obsession with wings. I follow people around at cons that are wearing them, and I stare at them fondly every year in Halloween shops wondering when I would be able to wear some of my own. I've also bought a few in recent years but have yet to wear them. Now, now I have my excuse! And twice no less!

So I pretty much had everything I needed except for wounds. Knowing that I would be wearing the wounds two different times for long periods of time I decided to pre-purchase some wounds rather than make my own from scratch. I found two at the Halloween Shop (one of those temporary Halloween stores). One for my arm and one for my face. As scared as I am about seeing gore on others, I gotta tell ya, I got a little carried away in the gore section of the Halloween Shop. It was such an amazing selection! I basically grabbed one of everything before realizing I should probably control myself... Some of the newer sets come with their own spirit gum and remover and some are just by themselves. But look for quality. Also, look for transparency in the fake skin. The clearer it is, the easier it will be to blend to your own skin tone.

To get the layered effect we used Spirit Gum, a Dark Green Cream makeup, St Ives Clay Mask, and two shades of Bright Green hair spray on top. Oh! And I also used Dark green pixie ears. We adhered the ears on first, then I layered on the dark green cream makeup because it would take forever to set. While that was setting I attached my face wound. Originally I wanted it lower but it would not adhere to my chin. So I kept moving it up until it stuck in place. I then layered on some of the clay mask to add depth. Once that was dry I sprayed the two hairsprays for dimension. Add in the green catseye contacts and that's it!

For the outfit itself, it's the Green dress from the Costume sale plus two sets of green tights. I also cut up a pair of old boots to wear. One set of the tights were for my legs and one for my arms. On the left arm I slit a hole in the tights and attached the arm wound to my skin. This turned out THE BEST. Mostly because I didn't have to use a mirror. Layer on some green "zombie blood" after the same steps from my face and I was pretty much good to go!

I loved how many people were at Calgary Zombie Walk! So many groups and themes. There were a couple other fairies that were too far ahead to get a picture of but we came across some amazing pieces of work. Below is definitely my favorite two pics, the zombie bride and a close up someone got of my makeup!

I Helped Make a Direwolf... What did you do this weekend?

This is where all Direwolves start out...

So Guavious has been wanting to build a Ghost Direwolf for our Game of Thrones cosplay extravaganza for quite some time. There have been two skeletons in my garage for almost 8 months with no progress and with Norwescon coming up I was getting a little worried. So worried that I actually told the Guild  “I’m not getting stuck with this, we’re not doing it”.  However, this weekend, Guavious was finally home and we surprisingly set to work.  The skeleton is made up of central vacuum pipe, spray foam, and chicken wire. Guavious used two types of spray foam, which I refer to as the hard spray foam and the soft spray foam. The hard spray foam was

Framing the wolves

used on the head, but the softer spray foam is what is currently coating the body and the front of the head. It was much more malleable and easier to sew into.  There are piping connectors for the tail and for the head to use as markers. This was done for two reasons. First, so that we could work on the different pieces separately, and second, so that when we are shipping him, he can be in different pieces which reduce the overall fragile state. 

The Wolves taking up space...

Dejathoris salvaged an amazing white fur coat that when draped over Ghost’s form, looked like it would not only cover, but leave enough room for the legs, head, and tail. When Guavious and I started taking it apart we realized that it was sewn in strips about 12” wide, that there was significant grey striping that was more visible now that it was being taken apart, and that the bulk of the coat was liner and filler. Had we used the remaining material, we would have had to cut Ghost down to about half his size.  We did however, keep the large collar which was a solid white and extra fluffy fur in the front of our minds. 

FUR EVERYWHERE!

Setting out to scavenge the city, we found at Wal-Mart of all places these ridiculous decorative mats. They were shaggy and pure white and shed EVERYWHERE. Perfect! Grabbing three, we went home to see what we could do with them. 

 We left the non-slip matting on the bottom to help with gluing onto Ghost’s frame. This helped keep the fur together and also helped with placement. We started with the legs, cutting strips and gluing them on with Elmer’s Spray Adhesive. Elmer’s stated that the product needed an hour to dry, so after all four legs were glued on; we stopped work for an hour. As the products were drying we realized that all the overlap created gaping and did not secure as snug as we wanted, so we decided to hand-stitched all the seams. SEW ALL THE SEAMS! This turned into a much bigger project than expected.  We then used the larger of the mats and lined up the four legs. We cut “X”’s into where the legs lined up, flipped Ghost onto his back and fed the fabric through until it was flush. We wanted the lower and upper pieces of the body to overlap each other so that we could create a layering effect. Build “muscle” and reduce gaps. So the belly piece actually wraps all the way around Ghost to about mid-frame. This was then spray glued again. Due to the large amount of surface space, it held on pretty good. However the front and back of Ghost’s body where there was overlap was then hand-stitched. This helped bulk up his frame some more. 

Layering on the top piece was the easiest. One large piece of mat draped over, glued and then, sewn for good measure.  When then layered over the front of Ghost the white fur collar from the original jacket. This puffed out his chest and allowed for a nice large overlap for where his head would ultimately go. This entire mane had to be hand sewn on. 

While Guavious was doing that, I was busy breaking my sewing machine needles trying to seal the tail. I had to stop and hand-sew. Later I found out from my mother I could have saved myself some work if I only used “Extra Sharp” sewing needles!!! Drat!

Tail!

Now onto the head. We had JUST ENOUGH of the mats to cover the head, so we glued everything on and took a break for it to dry. By this point, I realized that Aleene’s Spray Adhesive not only dried faster, but worked better overall. So I switched to this.  We headed out to Michaels to look for some inspiration pieces for the ears, eyes, and nose. 

Painting the eyes...

We found black clay for the nose, sheets of craft foam for the ears (to hold their shape), and the amazing decorative lights for the eyes.  We painted the eyes with stained glass paint so that the whole effect would be red, rather than only red. This added to the pop factor. Guavious doesn't like the eyes turned on, I think they looks extra cool with them on. It'll be an ongoing debate. 



 

Worst.Direwolf.EVER

Getting back home, we started placing everything and came to the following conclusion: 
This head totally SUCKS!!!!! He looked goofy and like a white-furred Scoobie Doo. Not the look we’re going for. So Guavious ripped all the fur off the head and started over from scratch. 

After re-looking at our inspiration photos, we decided his snout needed to be more prominent and we needed to work with shorter fur on the face. We ran out to Wal-Mart yet again and picked up another mat (after a bunch of failed experiments with other fleeces and furs). We think we have officially ruined the sku-demand in the city of that particular mat. We laid out the mat and took the clippers we normally use on our RL pups and sheered the fur down.  We then wrapped the fur around the face so that it was more conical than cylindrical. This allowed for tapering at the nose and bulk at the back of the head, helping the shape out a ton!

While Guavious was sheering, I was working on the snout details. I had found a latex Werewolf mask at our local Costume Shoppe and decided to paint it white.  The mask was a full face mask with parts that you would actually adhere to your own teeth for full effect. I cut out the nose and both layers of teeth and set to work. Painting around the nose, and the inside of the mouth, everything else became white. I used Folk Art craft paint in white and only needed one layer (and it dried quick).  I then hand stitched the pieces onto the head with polyfill and cardboard stuffed inside to fill it up and add a structured jawline. 

  Guavious then finished up by stitching on the ears and placing the eyes. There’s still some more work left to be done, like the feet and finishing touches, but for the most part, this Direwolf is done!!

Completed Comic Book Shoes!

Completed Shoes!

Completed Comic Book Shoes!

8 months in the making... 

I am a lazy lazy crafting nerd... According to when I took the first picture to when I posted the last, it took me 8 months to finish this project!!! A long, long time ago I came across a lovely article on Fashionably Geek (http://fashionablygeek.com/shoes/diy-killer-comic-book-heels/). On the original post it states that it’ll take about 8 hours per shoe (

http://sogeekchic.com/post/26012304582/bluddyholly-smearrr-ironspy-diy-killer)

  

It all started out fun and exciting. I went down to my local comic book store and searched through some of the new releases. Originally I had in mind to make some Buffy themed shoes, but I couldn’t find any particular scene sticking out at me to make a statement on. There’s a little bit of background on the Buffy thing. I love BtVS. Like a ridiculous amount. I used to bail on friends every Saturday at 7:30 and ignore their calls (this is before PVR-ing, and I didn’t have a VCR to record) just to secretly sneak home and watch Buffy like an addict. Because of this, I’ve created this shrine in my head and can’t seem to make any of my Buffy crafts correct. 

Back on point! I found these lovely drawn Dorothy and the Wizard in Oz comics (learn more here: http://en.wikipedia.org/wiki/The_Wonderful_Wizard_of_Oz_%28comics%29) and just fell in love with the drawings. Everything was so animated and colourful I just had to have them. So I bought two of each (one to read and keep, one to destroy) and went home. After reading, I settled on some icon scenes in two of the stories and set about cutting up the pieces for the collage. I then selected some stand out panels and dialogue, set those aside, and organized the remaining pieces by the dominant colour visible in the panel. This part was really fun! I took a pair of old pumps, cleaned them off and set up my Mod Podge station. 

The reason I grouped all the pieces by colour is so that I could make an attempt to clearly define each piece, rather than have them blend together seamlessly. I was worried that I’d zone out and all of a sudden have half the shoe look green since it all came from the same “race scene” I liked. I set about smearing the Mod Podge over medium sized sections and then just stuck a bunch of pieces on and layered on more Mod Podge. This part took no time at all.  

Once this was all dry, I set to work on the pop out pieces I had selected. Mostly the pieces were dialogue bubbles  but I did have some images of Dorothy and her friends that I was hoping to put on the shoes. Unfortunately, the dialogue bubbles, the title and writing credits were the only ones that made it. I glued the dialogue bubbles to some black crafting foam, and once dried I hot-glued those onto the shoes.

FINALLY, I put a layer of red sequin trim around the top of the shoes and around the heel in honour of the beloved ruby slippers. This was done with hot-glue.  

                                                                        After everything was all dried, I layered on some Art Resin to seal the shoes so that I could actually wear them. I placed the shoes on some parchment paper, and applied very thin layers using a disposable foam brush. Expect the resin to melt down to the bottom and pool on the shoes. To get rid of this you will need a file. I felt like this was a needed step to complete the look and to save it from hard wear and tear.  Overall this should have only taken me half the time considering my schedule. 

I've still got a bag with the left over pop pieces and some red sequins that I can't bare to throw in a box... I must find a project for these too!

Recommendations?